Details

---

BUY MB8516 https://www.utsource.net/itm/p/12600312.html

Parameter	Description	Value	Unit
Operating Voltage (Vcc)	Supply voltage range	2.7 to 5.5	V
Standby Current	Current consumption in standby mode	0.1	渭A
Active Current	Current consumption in active mode	1.0	mA
Data Retention Time	Minimum data retention time at 85掳C	10	years
Write Cycle	Maximum number of write cycles per cell	1,000,000	-
Operating Temperature	Range of operating temperature	-40 to +85	掳C
Storage Temperature	Range of storage temperature	-55 to +125	掳C
Access Time	Time required for read/write operations	70	ns
Package Type	Type of package	8-pin SOP, TSSOP	-
Memory Organization	Memory size and organization	2 Kbits (256 x 8)	-

Instructions:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 5.5V.
   • Use a stable power source to avoid voltage fluctuations.

2. Pin Configuration:

   • Refer to the datasheet for the specific pin configuration of the MB8516.
   • Connect the Vcc and GND pins correctly to ensure proper operation.

3. Write Operations:

   • Before writing to a memory location, ensure that the previous write operation has completed.
   • The maximum number of write cycles per cell is 1,000,000. Avoid excessive writes to prevent wear.

4. Read Operations:

   • The access time for read operations is 70 nanoseconds. Ensure your system can handle this timing requirement.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to +85掳C.
   • Store the device within the temperature range of -55掳C to +125掳C to maintain reliability.

6. Standby Mode:

   • To minimize power consumption, use the standby mode when the device is not actively being used.
   • The standby current is 0.1 渭A, which is very low.

7. Data Retention:

   • Data retention is guaranteed for at least 10 years at 85掳C.
   • Store the device in a cool, dry place to maximize data retention.

8. Handling:

   • Handle the device with care to avoid static discharge and physical damage.
   • Follow standard ESD (Electrostatic Discharge) precautions when handling the device.

9. Package Type:

   • The MB8516 is available in 8-pin SOP (Small Outline Package) and TSSOP (Thin Shrink Small Outline Package).
   • Choose the appropriate package type based on your application requirements.

10. Testing and Validation:

    • Perform thorough testing and validation of the device in your specific application to ensure reliable operation.

(For reference only)