Details

---

BUY S216S01F https://www.utsource.net/itm/p/12600319.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	1.7	3.6	5.5	V	Operating voltage range
Standby Current	ISB	-	0.1	1	渭A	Current consumption in standby mode
Active Current	IOP	-	30	40	渭A	Current consumption in active mode
Output Current	IO	0	10	20	mA	Maximum output current
Operating Frequency	fMAX	1	100	200	kHz	Maximum operating frequency
Rise Time	tr	-	0.5	1	渭s	Time to rise from 10% to 90% of output level
Fall Time	tf	-	0.5	1	渭s	Time to fall from 90% to 10% of output level
Operating Temperature	Toper	-40	-	85	掳C	Operating temperature range
Storage Temperature	Tstg	-65	-	150	掳C	Storage temperature range

Instructions for S216S01F

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the specified range of 1.7V to 5.5V.
   • Use appropriate decoupling capacitors (typically 0.1渭F and 10渭F) close to the power pins to stabilize the supply voltage.

2. Operating Mode:

   • To enter standby mode, set the enable pin to a low logic level.
   • To activate the device, set the enable pin to a high logic level.

3. Output Configuration:

   • The output can drive loads up to 20mA. Ensure the load resistance is within the safe operating area.
   • For high-frequency applications, consider adding a small series resistor to the output to reduce ringing and overshoot.

4. Temperature Considerations:

   • The device is rated to operate between -40掳C and 85掳C. Avoid exposing the device to temperatures outside this range during operation.
   • Store the device between -65掳C and 150掳C.

5. Handling and ESD Protection:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Use proper ESD protection measures when handling and soldering the device.

6. Layout Guidelines:

   • Keep signal traces as short as possible to minimize parasitic inductance and capacitance.
   • Ground planes should be used to provide a low-impedance return path for signals and to reduce noise.

7. Testing:

   • Before finalizing the design, test the device under various operating conditions to ensure it meets the required performance specifications.
   • Use a scope to verify the rise and fall times and ensure they are within the specified limits.

(For reference only)