Details

---

BUY SN74ALS867NT https://www.utsource.net/itm/p/12600699.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	4.75		5.25	V
Input Low Voltage	VI(L)	IIL = 0.4 mA	0		0.8	V
Input High Voltage	VI(H)	IIH = -0.04 mA	2		Vcc	V
Output Low Voltage	VO(L)	IO = 16 mA	0		0.5	V
Output High Voltage	VO(H)	IO = -4 mA	2.4		Vcc	V
Propagation Delay Time	tpd	Vcc = 5V, TA = 25掳C		12		ns
Power Dissipation	PD				340	mW

Instructions for SN74ALS867NT:

1. Power Supply: Ensure the supply voltage (Vcc) is within the range of 4.75V to 5.25V to avoid damage to the device.
2. Input Signals: For proper logic level recognition, input voltages should be below 0.8V for a low signal and above 2V for a high signal when Vcc is at its minimum value.
3. Output Loads: The output can drive up to 16 mA in the low state and sink up to 4 mA in the high state without exceeding specified voltage levels.
4. Propagation Delay: Expect a typical propagation delay of 12 ns under standard operating conditions (Vcc = 5V, ambient temperature = 25掳C).
5. Power Management: Keep the power dissipation below 340 mW to prevent overheating and ensure reliable operation.
6. Handling Precautions: This device is sensitive to electrostatic discharge (ESD); use appropriate handling procedures to avoid damage.

(For reference only)