Details

---

BUY V23086-C2002-A403 https://www.utsource.net/itm/p/12600707.html

Parameter	Value
Part Number	V23086-C2002-A403
Description	Voltage Regulator Module
Input Voltage Range	4.5V to 16V
Output Voltage	3.3V (Fixed)
Output Current	2A
Quiescent Current	200渭A (Typical)
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-55掳C to +125掳C
Package Type	SMD (Surface Mount Device)
Pin Configuration	8-Pin SOIC
Protection Features	Overcurrent, Overtemperature
Efficiency	Up to 95%
Ripple and Noise	<50mV (Typical)

Instructions for Use:

1. Mounting:

   • Ensure the PCB has the correct footprint for the 8-Pin SOIC package.
   • Place the module on the PCB and solder the pins securely.

2. Power Input:

   • Connect the input voltage (4.5V to 16V) to the VIN pin.
   • Ensure the input power supply is stable and within the specified range.

3. Ground Connection:

   • Connect the GND pin to the ground of your circuit.

4. Output Connection:

   • Connect the VOUT pin to the load or the circuit requiring 3.3V.
   • Ensure the load does not exceed the maximum output current of 2A.

5. Heat Dissipation:

   • For high current applications, consider adding a heatsink or thermal pad under the module to improve heat dissipation.

6. Capacitors:

   • It is recommended to place a 10渭F ceramic capacitor close to the VIN and GND pins for better stability.
   • Place a 10渭F ceramic capacitor close to the VOUT and GND pins to filter out any ripple.

7. Protection:

   • The module includes overcurrent and overtemperature protection. However, avoid prolonged operation under fault conditions to prevent damage.

8. Testing:

   • After assembly, test the output voltage with no load to ensure it is stable at 3.3V.
   • Gradually increase the load to the maximum current and monitor the output voltage and temperature.

9. Storage:

   • Store the module in a dry, cool place away from direct sunlight and moisture.

10. Handling:

    • Handle the module with care to avoid damaging the pins or the internal components.
    • Use proper ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

(For reference only)