Details

---

BUY SN74HC4066N https://www.utsource.net/itm/p/12600710.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	VCC	2.0	-	6.0	V
Input Low Voltage	VIL	-	-	1.5	V
Input High Voltage	VIH	3.5	-	-	V
Output Low Voltage	VOL	-	0.1	0.5	V	@ IOL = 4 mA
Output High Voltage	VOH	4.5	-	-	V	@ IOH = -4 mA
On-State Resistance	RON	-	5.0	10	惟	@ VCC = 5 V, TA = 25掳C
Off-State Leakage Current	IOFF	-	10	100	nA	@ VCC = 5 V, TA = 25掳C
Maximum Junction Temperature	TJ(max)	-	-	150	掳C
Storage Temperature Range	TSTG	-65	-	150	掳C

Instructions for Using SN74HC4066N

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.0 V to 6.0 V.
   • Connect V_CC to the positive power supply and GND to the ground.

2. Input Signals:

   • For a logic low input, ensure the voltage is below 1.5 V.
   • For a logic high input, ensure the voltage is above 3.5 V.

3. Output Signals:

   • When the switch is on, the output voltage will be close to the supply voltage (V_OH).
   • When the switch is off, the output voltage will be close to ground (V_OL).

4. Switch Operation:

   • The device contains four bilateral switches that can be controlled independently.
   • Apply a logic high to the control input (C) to turn the switch on.
   • Apply a logic low to the control input (C) to turn the switch off.

5. Temperature Considerations:

   • Ensure the junction temperature (T_J) does not exceed 150掳C.
   • Store the device in an environment with temperatures between -65掳C and 150掳C.

6. Handling Precautions:

   • Handle the device with care to avoid static damage.
   • Use proper anti-static measures when handling and storing the device.

7. Layout Recommendations:

   • Keep signal traces short to minimize parasitic capacitance and inductance.
   • Use decoupling capacitors (typically 0.1 渭F) close to the V_CC and GND pins to filter out noise.

8. Testing:

   • Test the device under typical operating conditions to ensure it meets the specified parameters.
   • Verify the on-state resistance and off-state leakage current to ensure proper functionality.

(For reference only)