Details

---

BUY IRG7S313UTRLPBF https://www.utsource.net/itm/p/12600726.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Continuous Drain Current	ID	-	35	-	A	@ Tc = 25掳C, VGS = 10V
Pulse Drain Current	IDM	-	65	-	A	@ Tc = 25掳C, t = 10ms, Duty Cycle = 1%
Gate-Source Voltage	VGS	-15	-	15	V	-
Drain-Source Breakdown Voltage	VDS	-	700	-	V	-
On-State Resistance	RDS(on)	-	0.39	-	惟	@ VGS = 10V, ID = 35A
Gate Charge	Qg	-	244	-	nC	-
Input Capacitance	Ciss	-	2880	-	pF	@ VDS = 400V, f = 1MHz
Output Capacitance	Coss	-	165	-	pF	@ VDS = 400V, f = 1MHz
Reverse Transfer Capacitance	Crss	-	115	-	pF	@ VDS = 400V, f = 1MHz
Total Switching Energy	ETSW	-	1100	-	渭J	@ VDS = 400V, ID = 35A, f = 100kHz
Junction Temperature	TJ	-55	-	175	掳C	-
Storage Temperature	TSTG	-55	-	150	掳C	-

Instructions for Use:

1. Handling Precautions:

   • Handle with care to avoid damage to the device.
   • Use proper ESD (Electrostatic Discharge) protection to prevent damage from static electricity.

2. Mounting:

   • Ensure proper thermal management by using a heatsink or other cooling methods to keep the junction temperature within the specified range.
   • Follow the recommended PCB layout guidelines to minimize parasitic inductances and ensure reliable operation.

3. Biasing:

   • Apply the gate-source voltage (VGS) within the specified limits to avoid damaging the device.
   • Use a gate resistor to control the switching speed and reduce electromagnetic interference (EMI).

4. Current Limitation:

   • Do not exceed the continuous drain current (ID) or pulse drain current (IDM) ratings.
   • Ensure that the power dissipation is within safe limits to avoid overheating.

5. Testing:

   • Perform initial testing at low power levels to verify the correct operation of the circuit.
   • Monitor the temperature and performance parameters during operation to ensure reliability.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Follow the storage temperature range (TSTG) to prevent degradation of the device.

7. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Use appropriate personal protective equipment (PPE) as necessary.

(For reference only)