Details

---

BUY SLI-S-112DMK https://www.utsource.net/itm/p/12600739.html

Parameter	Description
Model Number	SLI-S-112DMK
Type	Surface Mount Inductor
Inductance	1.0 渭H to 100 渭H (varies by specific part number)
Tolerance	卤5%
DC Resistance (m惟)	0.6 to 120 m惟 (varies with inductance value)
Rated Current (A)	0.4 to 3.0 A (varies with inductance value)
Saturation Current	0.5 to 3.5 A (varies with inductance value)
Operating Temperature	-55掳C to +125掳C
Case Size	1206 (3.2 mm x 1.6 mm)
Termination	Tin-lead (Sn/Pb) or Lead-free (RoHS compliant)
Shielding	Shielded (molded case)
Frequency Range	Up to 100 MHz
Applications	Power supplies, DC-DC converters, noise suppression, and filtering circuits

Instructions for Use:

1. Handling and Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.

2. Mounting:

   • Use a soldering iron with a temperature not exceeding 350掳C.
   • Soldering time should not exceed 3 seconds per terminal.
   • Ensure proper alignment and secure mounting to prevent mechanical stress.

3. Soldering:

   • Preheat the PCB to 120掳C to 150掳C to minimize thermal shock.
   • Use a flux-compatible solder for optimal adhesion.
   • Inspect solder joints for quality and ensure no shorts or bridges.

4. Testing:

   • Measure inductance and DC resistance using a suitable LCR meter.
   • Verify that the inductor meets the specified tolerance and performance criteria.

5. Environmental Considerations:

   • Ensure the operating environment does not exceed the specified temperature range.
   • Avoid exposure to corrosive gases and liquids.

6. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Recycle where possible to minimize environmental impact.

(For reference only)