Details

---

BUY RC4580N https://www.utsource.net/itm/p/12600746.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	2.0		6.0	V
Input Offset Voltage	Vio		-5	0	+5	mV
Input Bias Current	Iib			10		nA
Slew Rate	SR			0.3		V/μs
Bandwidth	BW	Small Signal		1		MHz
Output Short-Circuit		Continuous
Operating Temperature	Topr	Storage	-40		85	°C

Instructions for RC4580N:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.0V to 6.0V for stable operation.

2. Input Connections:

   • Be cautious with input signals to avoid exceeding the common-mode input voltage range, which should be within the supply rails.
   • Keep input bias current in mind when designing input circuits to minimize errors.

3. Output Usage:

   • The output can drive a load directly but should not be short-circuited continuously. If possible, use external resistors to limit current in case of accidental shorts.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C to ensure reliable performance.

5. Handling and Storage:

   • Store the component in a dry environment and handle with care to avoid electrostatic discharge (ESD) damage.

6. Application Circuits:

   • Refer to manufacturer application notes for recommended circuit configurations and best practices to achieve optimal performance.

7. Testing and Troubleshooting:

   • During testing, monitor the supply voltage and temperature closely. Use appropriate test equipment to avoid damaging the component.

(For reference only)