Details

---

BUY SN74107N https://www.utsource.net/itm/p/12601123.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	VCC	-	4.75	-	5.25	V
Output High Voltage	VOH	IOL = -0.4 mA, VCC = 5 V	2.4	-	5.0	V
Output Low Voltage	VOL	IOL = 8.0 mA, VCC = 5 V	0.0	-	0.4	V
Input High Voltage	VIH	-	2.0	-	5.0	V
Input Low Voltage	VIL	-	0.0	-	0.8	V
Propagation Delay Time	tpd	-	-	35	-	ns
Power Dissipation	PD	-	-	-	100	mW
Operating Temperature Range	TA	-	-40	-	85	掳C
Storage Temperature Range	TSTG	-	-65	-	150	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.75 V to 5.25 V.
   • Connect the ground (GND) pin to a stable reference ground.

2. Input Signals:

   • Apply input signals (D, CLK, CLR, PRE) with voltages that meet the specified input high (V_IH) and input low (V_IL) levels.
   • Ensure that input signals are clean and free from noise to avoid unintended triggering of the flip-flop.

3. Output Loads:

   • The output pins (Q, Q?) can drive loads up to the specified current limits. Ensure that the load does not exceed the maximum output current ratings.
   • Use pull-up or pull-down resistors if necessary to maintain proper logic levels.

4. Propagation Delay:

   • Account for the propagation delay time (t_pd) in your timing calculations to ensure correct operation of the circuit.

5. Temperature Considerations:

   • Operate the device within the specified operating temperature range (-40掳C to 85掳C) to ensure reliable performance.
   • Store the device within the storage temperature range (-65掳C to 150掳C) to prevent damage.

6. Power Dissipation:

   • Ensure that the power dissipation (P_D) does not exceed 100 mW to avoid overheating and potential damage to the device.
   • Use appropriate heat sinking or cooling methods if necessary.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Follow proper ESD (Electrostatic Discharge) handling procedures when working with the device.

By following these instructions, you can ensure the reliable and efficient operation of the SN74107N dual J-K flip-flop.

(For reference only)