Details

---

BUY KRTB1-225L 12VDC https://www.utsource.net/itm/p/12602869.html

Parameter	Value	Unit
Type	Relay	-
Model	KRTB1-225L 12VDC	-
Coil Voltage	12	VDC
Coil Power	0.36	W
Coil Resistance	330	惟
Contact Form	SPDT (Single Pole, Double Throw)	-
Contact Rating	250VAC/10A	-
Maximum Switching Capacity	225VA	-
Insulation Resistance	1000	M惟
Dielectric Strength	2500	VAC
Mechanical Life	10,000,000	Cycles
Electrical Life	100,000	Cycles
Operating Temperature	-40 to +85	掳C
Storage Temperature	-40 to +125	掳C
Weight	12	g

Instructions:

1. Installation:

   • Ensure the relay is installed in a location that meets the operating temperature range.
   • Connect the coil terminals to the appropriate 12VDC power supply.
   • Connect the load to the normally open (NO) or normally closed (NC) contacts as required.

2. Operation:

   • When the coil is energized, the relay will switch from the normally closed (NC) contact to the normally open (NO) contact.
   • When the coil is de-energized, the relay will return to its default state (NC).

3. Maintenance:

   • Regularly inspect the relay for any signs of wear or damage.
   • Ensure the contacts are clean and free from corrosion.
   • Replace the relay if it shows signs of malfunction or if the electrical life has been exceeded.

4. Safety:

   • Do not exceed the maximum switching capacity of the relay.
   • Ensure proper insulation and grounding to prevent electrical hazards.
   • Follow all local and national electrical codes and regulations.

(For reference only)