Details

---

BUY SN75175DRG4 https://www.utsource.net/itm/p/12602905.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	4.75	5.0	5.25	V	-
Input Voltage Range	VI	-0.5	-	5.5	V	-
Output Voltage Range	VO	0	-	VCC	V	-
Output Current (Source)	IOH	-	16	-	mA	VO = 2.4V, VCC = 5V
Output Current (Sink)	IOL	-	24	-	mA	VO = 0.4V, VCC = 5V
Propagation Delay Time	tpd	-	35	-	ns	VCC = 5V, VI = 2.0V to 3.0V, VO = 2.0V to 3.0V
Skew	tskew	-	5	-	ns	VCC = 5V, VI = 2.0V to 3.0V, VO = 2.0V to 3.0V
Power Dissipation	PD	-	-	625	mW	TA = 25掳C, VCC = 5V
Operating Temperature Range	TA	-40	-	85	掳C	-
Storage Temperature Range	TSTG	-65	-	150	掳C	-

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.75V to 5.25V.
   • Connect the ground (GND) pin to the system ground.

2. Input Signals:

   • The input voltage (V_I) should be within the range of -0.5V to 5.5V.
   • Avoid exceeding these limits to prevent damage to the device.

3. Output Signals:

   • The output voltage (V_O) will be between 0V and V_CC.
   • The output current capabilities are 16mA (source) and 24mA (sink).

4. Propagation Delay:

   • The propagation delay time (t_pd) is typically 35ns under standard conditions.
   • The skew (t_skew) between channels is typically 5ns.

5. Thermal Management:

   • The power dissipation (P_D) should not exceed 625mW at 25掳C ambient temperature.
   • For higher ambient temperatures, ensure adequate heat sinking or cooling.

6. Temperature Ranges:

   • The operating temperature range (T_A) is from -40掳C to 85掳C.
   • The storage temperature range (T_STG) is from -65掳C to 150掳C.

7. Handling and Storage:

   • Store the device in a dry environment to prevent moisture damage.
   • Handle with care to avoid static discharge, which can damage the device.

8. Mounting:

   • Follow the recommended PCB layout guidelines to ensure proper thermal performance and signal integrity.
   • Ensure all connections are secure and free from solder bridges or shorts.

9. Testing:

   • Test the device under typical operating conditions to verify its functionality.
   • Use a multimeter to check for correct voltage levels and continuity.

10. Compliance:

    • Ensure that the device complies with relevant safety and regulatory standards for your application.

(For reference only)