Details

---

BUY 65C6380 https://www.utsource.net/itm/p/12602906.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (Vcc)	Operating voltage range	4.75	5.0	5.25	V
Current Consumption (Icc)	Total current consumption at 2 MHz	-	150	-	mA
Output High Level Voltage (VOH)	Output high level voltage at 4.75V ≤ Vcc ≤ 5.25V, IOL = 0.4mA	2.4	-	-	V
Output Low Level Voltage (VOL)	Output low level voltage at 4.75V ≤ Vcc ≤ 5.25V, IOH = -0.4mA	-	0.4	-	V
Input Low Level Voltage (VIL)	Input low level voltage	-	0.8	-	V
Input High Level Voltage (VIH)	Input high level voltage	-	2.0	-	V
Propagation Delay Time (tpd)	Propagation delay time from input to output	-	150	-	ns
Storage Temperature Range (Tstg)	Temperature range for storage	-65	-	150	°C
Operating Temperature Range (Topr)	Temperature range for operation	0	-	70	°C

Instructions for Using the 65C6380

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 4.75V to 5.25V.
   • Use a stable power source to avoid voltage fluctuations that could affect performance.

2. Current Consumption:

   • The device typically consumes around 150mA at 2 MHz. Ensure your power supply can handle this current requirement.

3. Output Levels:

   • The output high level voltage (VOH) should be at least 2.4V when the output is high.
   • The output low level voltage (VOL) should not exceed 0.4V when the output is low.

4. Input Levels:

   • The input low level voltage (VIL) should be below 0.8V to ensure a valid low input.
   • The input high level voltage (VIH) should be above 2.0V to ensure a valid high input.

5. Propagation Delay:

   • The typical propagation delay time (tpd) is 150ns. This is the time it takes for a change at the input to appear at the output.

6. Temperature Considerations:

   • Store the device in a temperature range between -65°C and 150°C.
   • Operate the device within a temperature range of 0°C to 70°C to ensure reliable performance.

7. Handling:

   • Handle the device with care to avoid static damage. Use proper ESD (Electrostatic Discharge) protection measures.
   • Avoid exposing the device to excessive humidity or corrosive environments.

8. Application:

   • The 65C6380 is designed for use in various digital systems where high-speed data processing is required. Ensure that all connections are secure and meet the electrical specifications provided.

9. Testing:

   • Before integrating the device into a system, test it using a known good setup to verify its functionality.

10. Documentation:

    • Refer to the datasheet and application notes for detailed information on specific applications and advanced usage.

(For reference only)