Details

---

BUY 74LS154N https://www.utsource.net/itm/p/12602917.html

Parameter	Description	Value
Part Number	Product Identifier	74LS154N
Function	4-Line-to-16-Line Decoder/Demultiplexer
Supply Voltage (Vcc)	Operating Supply Voltage	4.75V to 5.25V
Input Voltage (VIH)	Input High Voltage Level	Min: 2.0V, Max: Vcc
Input Voltage (VIL)	Input Low Voltage Level	Min: 0V, Max: 0.8V
Output Voltage (VOH)	Output High Voltage Level	Min: 2.4V
Output Voltage (VOL)	Output Low Voltage Level	Max: 0.4V
Propagation Delay Time	Typical Propagation Delay Time	22ns
Power Dissipation	Total Power Dissipation	100mW
Operating Temperature	Junction Temperature Range	-55掳C to +125掳C
Storage Temperature	Storage Temperature Range	-65掳C to +150掳C

Instructions for Use:

1. Power Supply Connection: Connect the Vcc pin to a 5V power supply and GND pin to ground.
2. Enable Inputs: The chip has two enable inputs (G1 and G2). Both must be LOW for the decoder to operate. If either is HIGH, all outputs are HIGH.
3. Address Inputs: Four address lines (A0-A3) determine which of the 16 output lines will be active (LOW). Only one output line is active at any given time based on the binary value of A0-A3.
4. Output Lines: The 16 output lines (Y0-Y15) are active LOW. When an output is selected by the address lines, it goes LOW while all others remain HIGH.
5. Handling Unused Inputs: Ensure that unused address inputs are tied to a known state (either HIGH or LOW) to prevent undefined behavior.
6. Decoding Application: This IC can be used in applications such as memory addressing, signal routing, or controlling multiple devices from a few control lines.

(For reference only)