Details

---

BUY 071-0039 https://www.utsource.net/itm/p/12602942.html

Parameter	Value	Unit
Part Number	071-0039	-
Description	Capacitor	-
Capacitance	100	pF
Voltage Rating	50	V
Tolerance	卤5%	-
Operating Temp.	-55 to +85	掳C
Case Size	0402	-
Packaging	Tape & Reel	-
Lead Type	Surface Mount	-
Material	Ceramic	-

Instructions:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions to prevent damage.

2. Soldering:

   • Preheat components to 125掳C for 5 minutes before soldering.
   • Soldering temperature should not exceed 260掳C.
   • Soldering time should not exceed 10 seconds per joint.

3. Mounting:

   • Ensure the PCB is clean and free from contaminants.
   • Place the component on the PCB using automated pick-and-place equipment.
   • Align the component correctly according to the PCB layout.

4. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Recommended storage temperature: -10 to +40掳C.
   • Humidity: Less than 60%.

5. Inspection:

   • Inspect the solder joints for proper wetting and absence of voids or bridges.
   • Use X-ray inspection if necessary to ensure proper placement and solder quality.

6. Testing:

   • Perform electrical testing to verify capacitance and voltage ratings.
   • Use a multimeter or capacitance meter for accurate measurements.

7. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Recycle where possible.

(For reference only)