Details

---

BUY TLV62130ARGTR https://www.utsource.net/itm/p/12602967.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	1.8	-	5.5	V	Operating input voltage range
Output Voltage	VOUT	-	1.2 to 5.0	-	V	Adjustable output voltage range
Output Current	IOUT	-	300	-	mA	Maximum continuous output current
Quiescent Current	IQ	1.5	-	-	μA	Quiescent current at no load
Dropout Voltage	VDROPOUT	-	220	-	mV	Typical dropout voltage at full load
Load Regulation	ΔVOUT/ΔILOAD	-	2	-	mV/A	Change in output voltage with respect to load current
Line Regulation	ΔVOUT/ΔVIN	-	0.01	-	%/V	Change in output voltage with respect to input voltage
PSRR (100 kHz)	PSRR	-	40	-	dB	Power supply rejection ratio at 100 kHz
Operating Temperature Range	Toper	-40	-	125	°C	Operating temperature range
Storage Temperature Range	Tstg	-65	-	150	°C	Storage temperature range

Instructions for Use:

1. Input Voltage (VIN):

   • Ensure the input voltage is within the range of 1.8V to 5.5V.
   • Connect the input voltage to the VIN pin and ground to GND.

2. Output Voltage (VOUT):

   • Set the desired output voltage using the external feedback resistors R1 and R2.
   • The formula to calculate the output voltage is: ( V_ = V_ left(1 + fracright) ), where ( V_ ) is typically 1.2V.

3. Output Current (IOUT):

   • The device can provide up to 300mA of continuous output current.
   • Ensure the load does not exceed this limit to avoid overheating or damage.

4. Quiescent Current (IQ):

   • The quiescent current is very low, typically 1.5μA, which makes the device suitable for low-power applications.

5. Dropout Voltage (VDROPOUT):

   • The typical dropout voltage is 220mV, allowing the device to operate efficiently even when the input voltage is close to the output voltage.

6. Load Regulation:

   • The load regulation is 2mV/A, indicating a small change in output voltage with varying load currents.

7. Line Regulation:

   • The line regulation is 0.01%/V, ensuring minimal changes in output voltage with variations in input voltage.

8. PSRR (100 kHz):

   • The power supply rejection ratio is 40dB at 100 kHz, providing good noise suppression from the input supply.

9. Operating Temperature Range:

   • The device operates reliably over a temperature range of -40°C to 125°C.

10. Storage Temperature Range:

    • Store the device in an environment with temperatures between -65°C and 150°C to ensure long-term reliability.

Additional Notes:

• Always use appropriate decoupling capacitors on both the input and output to ensure stable operation.
• Refer to the datasheet for detailed information on PCB layout recommendations and thermal considerations.

(For reference only)