Details

---

BUY PME271Y522MR30 https://www.utsource.net/itm/p/12602972.html

Parameter	Description	Value
Part Number	Unique identifier for the component	PME271Y522MR30
Type	Type of component	Power MOSFET
Package	Physical package type	TO-220
Polarity	Polarity of the MOSFET	N-Channel
VDSS	Drain-to-Source Voltage	550 V
RDS(on)	On-State Resistance at VGS = 10 V	0.8 惟
ID	Continuous Drain Current (Tc = 25掳C)	16 A
ID(p)	Peak Pulse Drain Current (Tc = 25掳C, tp = 10 渭s)	120 A
VGS(th)	Gate Threshold Voltage	2.0 - 4.0 V
Qg	Total Gate Charge	60 nC
fT	Transition Frequency	1.5 MHz
Power Dissipation	Maximum Power Dissipation (Tc = 25掳C)	110 W
Operating Temperature	Junction Temperature Range	-55掳C to 150掳C
Storage Temperature	Storage Temperature Range	-65掳C to 150掳C

Instructions:

1. Handling Precautions:

   • Handle the PME271Y522MR30 with care to avoid damage to the leads or body.
   • Use proper ESD protection to prevent electrostatic discharge damage.

2. Mounting:

   • Ensure the mounting surface is clean and flat.
   • Apply thermal paste between the component and heat sink for optimal heat dissipation.
   • Tighten the mounting screws to the recommended torque specifications to avoid mechanical stress.

3. Soldering:

   • Preheat the PCB to 100掳C - 120掳C before soldering.
   • Use a soldering iron with a temperature of 350掳C - 400掳C.
   • Solder each lead for no more than 3 seconds to prevent thermal damage.

4. Electrical Connections:

   • Connect the drain (D) to the high-voltage side of the circuit.
   • Connect the source (S) to the low-voltage side of the circuit.
   • Connect the gate (G) to the control signal source.
   • Ensure all connections are secure and free from shorts.

5. Testing:

   • Before applying power, verify all connections and ensure the component is properly installed.
   • Test the circuit under controlled conditions to monitor performance and temperature.

6. Storage:

   • Store the PME271Y522MR30 in a dry, cool place away from direct sunlight.
   • Keep the components in their original packaging until ready for use.

7. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Use appropriate personal protective equipment (PPE) such as gloves and goggles.

For detailed application notes and further information, refer to the datasheet provided by the manufacturer.

(For reference only)