Details

---

BUY STA509A https://www.utsource.net/itm/p/12603230.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	4.5	5.0	5.5	V
Quiescent Current	Iq	-	1.2	-	mA
Output Power	Po	-	2.5	-	W
Efficiency	畏	65	75	85	%
Frequency Response	FR	20	-	20k	Hz
Signal-to-Noise Ratio	SNR	70	-	80	dB
Total Harmonic Distortion	THD	0.1	0.5	1.0	%
Operating Temperature	Toper	-40	-	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C

Instructions for Use:

1. Power Supply:

   • Connect the positive terminal of the power supply to Vcc and the negative terminal to GND.
   • Ensure the supply voltage is within the specified range (4.5V to 5.5V).

2. Input Signal:

   • Connect the audio input signal to the IN pin.
   • The input signal should be within the operating range of the device.

3. Output Connection:

   • Connect the speaker or load to the OUT pin.
   • Ensure the load impedance matches the recommended output impedance for optimal performance.

4. Thermal Management:

   • Mount the device on a heatsink if operating at high power levels to ensure proper heat dissipation.
   • Check the operating temperature regularly to avoid overheating.

5. Signal-to-Noise Ratio:

   • To achieve the best SNR, use shielded cables for input and output connections to minimize interference.

6. Total Harmonic Distortion:

   • Operate the device within its rated output power to maintain low THD levels.

7. Storage and Handling:

   • Store the device in a dry, cool place away from direct sunlight.
   • Handle with care to avoid physical damage.

8. Safety Precautions:

   • Do not exceed the maximum ratings specified in the parameter table.
   • Use appropriate fuses and protection circuits to prevent damage from overvoltage or short circuits.

(For reference only)