Details

---

BUY NE5532N(5pcs) https://www.utsource.net/itm/p/12603242.html

Parameter	Description
Part Number	NE5532N
Quantity	5 pcs
Type	Dual Low Noise Operational Amplifier
Supply Voltage	±1.5V to ±18V (Single Supply: 3V to 36V)
Bandwidth	10 MHz (Unity Gain Bandwidth)
Slew Rate	13 V/μs
**Input Offset Voltage	0.5 mV (Typical at 25°C)
Input Bias Current	8 pA (Typical at 25°C)
Output Current	60 mA (Short-Circuit Protection)
Operating Temperature Range	-40°C to +85°C
Package Type	SOIC-8, PDIP-8

Instructions for Use:

1. Power Supply: Ensure the supply voltage is within the specified range of ±1.5V to ±18V or single supply from 3V to 36V.
2. Installation: Carefully insert the NE5532N into a breadboard or PCB ensuring correct orientation. The pin configuration can be found in the datasheet.
3. Grounding: Properly ground all necessary points to minimize noise and ensure stable operation.
4. Capacitors: Place decoupling capacitors close to the power pins (typically 0.1 μF ceramic capacitors) to stabilize the power supply.
5. Signal Handling: Be cautious with input signals to avoid exceeding the common-mode input voltage range, which can lead to distortion or damage.
6. Heat Dissipation: Although the NE5532N has thermal protection, ensure adequate ventilation or heatsinking if operating at high output currents or temperatures.
7. Testing: After assembly, test the circuit under controlled conditions to verify functionality before full-scale deployment.

For detailed specifications and advanced applications, refer to the official datasheet provided by the manufacturer.

(For reference only)