Details

---

BUY SN74LS06N https://www.utsource.net/itm/p/12603554.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	VCC	-	4.75	-	5.25	V
Input Low Voltage	VIL	IL = 0.4 mA	0.8	-	-	V
Input High Voltage	VIH	IH = -0.4 mA	-	-	2.0	V
Output Low Voltage	VOL	IOL = 16 mA	0.4	-	-	V
Output High Voltage	VOH	IOH = -0.4 mA	-	-	2.4	V
Propagation Delay Time	tpd	VCC = 5V, TA = 25掳C	-	15	30	ns
Power Dissipation	PD	Per Package	-	-	500	mW
Operating Temperature Range	TA	-	-55	-	125	掳C

Instructions for Use:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 4.75V to 5.25V to avoid damage to the device.

2. Input Levels:

   • For a low input, ensure the voltage is below 0.8V.
   • For a high input, ensure the voltage is above 2.0V.

3. Output Levels:

   • When driving a load, ensure the output voltage does not exceed 2.4V when high and remains below 0.4V when low.

4. Propagation Delay:

   • The typical propagation delay time is 15ns at 25掳C. This can vary between 15ns and 30ns depending on conditions.

5. Power Dissipation:

   • The maximum power dissipation per package is 500mW. Ensure adequate heat sinking if operating near this limit.

6. Operating Temperature:

   • The device can operate in temperatures ranging from -55掳C to 125掳C. Ensure the ambient temperature stays within this range to prevent thermal stress.

7. Handling:

   • Handle the device with care to avoid static discharge. Use proper ESD protection practices during handling and installation.

8. Mounting:

   • Ensure proper mounting to the PCB to maintain good electrical and thermal performance. Follow recommended soldering profiles and cooling guidelines.

(For reference only)