Details

---

BUY MC74F32N https://www.utsource.net/itm/p/12603556.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	4.5	-	5.5	V
Output High Level Voltage	VOH	-	2.4	5.0	V
Output Low Level Voltage	VOL	0.0	-	0.4	V
Input High Level Voltage	VIH	2.0	-	5.5	V
Input Low Level Voltage	VIL	0.0	-	0.8	V
Propagation Delay Time (Typical)	tpd	-	12	-	ns
Power Dissipation	PD	-	-	100	mW
Operating Temperature Range	TA	-40	-	85	掳C
Storage Temperature Range	TSTG	-65	-	150	掳C

Instructions for Use:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 4.5V to 5.5V to avoid damage to the device.

2. Output Levels:

   • The output high level voltage (V_OH) should be at least 2.4V under typical conditions.
   • The output low level voltage (V_OL) should not exceed 0.4V under typical conditions.

3. Input Levels:

   • The input high level voltage (V_IH) must be at least 2.0V to ensure a high logic level.
   • The input low level voltage (V_IL) must not exceed 0.8V to ensure a low logic level.

4. Propagation Delay Time (t_pd):

   • The typical propagation delay time is 12 nanoseconds. This is the time it takes for the output to change after the input changes.

5. Power Dissipation (P_D):

   • The maximum power dissipation is 100 milliwatts. Ensure that the device is not subjected to excessive power to prevent overheating.

6. Operating Temperature Range (T_A):

   • The device can operate within a temperature range of -40掳C to 85掳C. Avoid operating outside this range to ensure reliable performance.

7. Storage Temperature Range (T_STG):

   • The device can be stored in temperatures ranging from -65掳C to 150掳C. However, ensure that it is brought to operating temperature before use.

8. Handling and Installation:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Ensure proper soldering techniques are used during installation to avoid thermal stress on the device.

9. Testing:

   • Before integrating the device into a circuit, test its functionality using a known good setup to verify that it meets the specified parameters.

10. Documentation:

    • Refer to the datasheet for detailed specifications and additional information. Always consult the latest version of the datasheet for the most accurate and up-to-date information.

(For reference only)