Details

---

BUY 74F04D https://www.utsource.net/itm/p/12603565.html

Below is the parameter table and instructions for the 74F04D Hex Inverter:

74F04D Hex Inverter Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Supply Voltage	VCC	4.5	5.0	5.5	V
Input Low Voltage	VIL	0.8	-	1.5	V	VCC = 5V
Input High Voltage	VIH	3.5	-	4.2	V	VCC = 5V
Output Low Voltage	VOL	0.2	-	0.4	V	IOL = 16mA, VCC = 5V
Output High Voltage	VOH	2.7	-	3.5	V	IOH = -4mA, VCC = 5V
Propagation Delay Time	tpd	3	5	7	ns	VCC = 5V, TA = 25掳C
Power Consumption	Pd	-	10	-	mW	VCC = 5V, f = 10MHz
Operating Temperature Range	TA	-40	-	85	掳C

Instructions for Using 74F04D Hex Inverter

1. Power Supply:

   • Connect the V_CC pin to a 5V power supply.
   • Connect the GND pin to ground.

2. Input Connections:

   • Each inverter has an input pin (1, 3, 5, 9, 11, 13).
   • Connect the input pins to the signals you want to invert.

3. Output Connections:

   • Each inverter has an output pin (2, 4, 6, 8, 10, 12).
   • Connect the output pins to the circuits or components that require the inverted signal.

4. Unused Inputs:

   • If any inputs are not used, tie them to V_CC or GND to avoid floating states which can cause unpredictable behavior.

5. Propagation Delay:

   • Be aware of the propagation delay time (t_pd) when designing your circuit to ensure timing requirements are met.

6. Temperature Considerations:

   • Ensure the operating temperature range (T_A) is within -40掳C to 85掳C to avoid damage to the component.

7. Power Consumption:

   • Monitor the power consumption to ensure it does not exceed the maximum ratings, especially at higher frequencies.

8. Handling Precautions:

   • Handle the 74F04D with care to avoid static discharge, which can damage the component.
   • Use appropriate ESD protection measures when handling the component.

By following these instructions, you can effectively use the 74F04D Hex Inverter in your digital circuits.

(For reference only)