Details

---

BUY LM358N https://www.utsource.net/itm/p/12603567.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	-	2.7	-	36	V
Input Voltage Range	VIN	-	0	VCC - 1.5	-	V
Output Voltage Swing	VOUT	Load = 10 k惟	0	VCC - 1.5	-	V
Quiescent Current	IQ	Per Amplifier	-	0.4	-	mA
Input Offset Voltage	VOS	-	-	2	7	mV
Input Bias Current	IB	-	-	45	500	nA
Input Offset Current	IIO	-	-	10	200	nA
Large Signal Voltage Gain	AV	-	100	-	-	dB
Slew Rate	SR	-	-	0.5	-	V/渭s
Common-Mode Rejection Ratio	CMRR	-	85	-	-	dB
Power Dissipation	PD	-	-	250	-	mW

Instructions for Using the LM358N

1. Power Supply:

   • The LM358N can operate from a single supply voltage ranging from 2.7V to 36V or from split supplies up to 卤18V.
   • Connect the positive supply (V_CC) to pin 8 and the negative supply (GND) to pin 4 for the first op-amp, and to pin 4 and pin 11 for the second op-amp.

2. Input Signals:

   • The input signals should be within the range of 0V to V_CC - 1.5V.
   • Connect the non-inverting input (pin 3 for the first op-amp, pin 5 for the second) and the inverting input (pin 2 for the first op-amp, pin 6 for the second) to your signal sources.

3. Output Configuration:

   • The output voltage swing is from 0V to V_CC - 1.5V with a load of 10 k惟.
   • Connect the output (pin 1 for the first op-amp, pin 7 for the second) to your load or next stage of the circuit.

4. Biasing and Compensation:

   • For optimal performance, ensure that the input bias current and input offset voltage are within the specified limits.
   • Use external compensation capacitors if necessary to stabilize the op-amp in high-gain configurations.

5. Temperature Range:

   • The LM358N is designed to operate over a temperature range of -25掳C to 85掳C.

6. Handling Precautions:

   • The LM358N is sensitive to electrostatic discharge (ESD). Handle the device with care and use proper ESD protection.
   • Avoid exceeding the maximum ratings to prevent damage to the device.

7. Application Examples:

   • Non-Inverting Amplifier: Connect the input signal to the non-inverting input and a feedback resistor between the output and inverting input.
   • Inverting Amplifier: Connect the input signal to the inverting input and a feedback resistor between the output and inverting input, with the non-inverting input grounded.
   • Voltage Follower: Connect the input signal to the non-inverting input and the output directly back to the inverting input.

By following these instructions, you can effectively use the LM358N in various analog circuits.

(For reference only)