Details

---

BUY MDC02 https://www.utsource.net/itm/p/12603578.html

Parameter	Description	Value
Model	Model Number	MDC02
Type	Device Type	Digital Controller
Input Voltage	Operating Voltage Range	5V - 24V DC
Current Rating	Maximum Continuous Current	2A
Control Method	Control Interface	PWM, I2C
Frequency Range	PWM Frequency Range	10Hz - 100kHz
Resolution	PWM Resolution	8-bit
Operating Temp	Operating Temperature Range	-20掳C to 70掳C
Storage Temp	Storage Temperature Range	-40掳C to 85掳C
Dimensions	Physical Dimensions (L x W x H)	30mm x 20mm x 10mm
Weight	Weight	10g
Protection	Overcurrent Protection	Yes
Overvoltage Protection	Overvoltage Protection	Yes
Short Circuit Protection	Short Circuit Protection	Yes

Instructions for Use

1. Power Supply:

   • Connect the power supply to the input terminals. Ensure the voltage is within the specified range (5V - 24V DC).

2. Control Interface:

   • PWM Control:
     • Connect the PWM signal to the designated PWM input pin.
     • Set the PWM frequency within the range of 10Hz to 100kHz.
     • Adjust the duty cycle to control the output.
   • I2C Control:
     • Connect the SDA and SCL lines to the I2C interface of your microcontroller.
     • Use the I2C protocol to send commands and receive data.

3. Output Connection:

   • Connect the load to the output terminals.
   • Ensure the current drawn by the load does not exceed the maximum continuous current rating of 2A.

4. Protection Features:

   • The device includes overcurrent, overvoltage, and short circuit protection. If any of these conditions occur, the device will automatically shut down to prevent damage.

5. Environmental Conditions:

   • Operate the device within the specified temperature ranges to ensure reliable performance.
   • Store the device in a dry environment to avoid moisture damage.

6. Mounting:

   • Mount the device on a stable surface using the provided mounting holes.
   • Ensure proper ventilation to prevent overheating.

7. Troubleshooting:

   • If the device does not operate as expected, check the power supply, connections, and control signals.
   • Refer to the datasheet for more detailed troubleshooting steps.

For further details, refer to the user manual or contact the manufacturer.

(For reference only)