Details

---

BUY MDST200-16 https://www.utsource.net/itm/p/12603596.html

Parameter	Description	Value
Part Number	Full part number	MDST200-16
Type	Type of device	MOSFET Driver
Package	Package type	SOIC-16
Input Voltage Range	Operating voltage range for input	4.5V to 18V
Output Current	Maximum output current	2A
Operating Temperature	Temperature range for operation	-40掳C to 125掳C
Quiescent Current	Current consumption in quiescent state	1.5mA
Propagation Delay	Time delay from input to output	50ns
Rise Time	Time to rise from 10% to 90% of output level	20ns
Fall Time	Time to fall from 90% to 10% of output level	20ns
Protection Features	Built-in protection features	Overvoltage, Thermal Shutdown
Isolation Voltage	Voltage isolation between input and output	2.5kV

Instructions

1. Power Supply Connection:

   • Connect the power supply to the VCC and GND pins.
   • Ensure the input voltage is within the specified range (4.5V to 18V).

2. Signal Input:

   • Apply the control signal to the IN pin.
   • The driver will amplify the signal to drive the MOSFET.

3. MOSFET Connection:

   • Connect the MOSFET gate to the OUT pin.
   • Connect the source of the MOSFET to the GND pin.

4. Thermal Management:

   • Ensure adequate heat dissipation by mounting the device on a heatsink if necessary.
   • Monitor the operating temperature to avoid exceeding the maximum rating (-40掳C to 125掳C).

5. Protection:

   • The device includes overvoltage and thermal shutdown protection.
   • Do not exceed the maximum ratings to prevent damage.

6. Storage:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid static discharge which can damage the device.

7. Testing:

   • Before final assembly, test the device in a controlled environment to ensure proper functionality.
   • Use a multimeter to verify connections and output signals.

(For reference only)