Details

---

BUY GBJ35M https://www.utsource.net/itm/p/12603597.html

Below is the parameter table and instructions for the GBJ35M electronic component:

GBJ35M Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Rated Voltage	VR	-	35	-	V
Capacitance	C	10	22	47	渭F
Dissipation Factor (DF)	DF	-	0.05	-
Insulation Resistance	RI	-	1000	-	M惟
Operating Temperature Range	Top	-55	-	85	掳C
Storage Temperature Range	Tst	-55	-	125	掳C
Ripple Current	IR	-	1000	-	mA
Equivalent Series Resistance (ESR)	ESR	-	0.1	-	惟

Instructions for GBJ35M

1. Mounting:

   • Ensure the capacitor is mounted with the correct polarity. The positive lead should be connected to the positive terminal and the negative lead to the ground.
   • Use appropriate mounting techniques to ensure the capacitor is securely fastened to the PCB.

2. Soldering:

   • Preheat the PCB to reduce thermal shock.
   • Use a soldering iron with a temperature between 300掳C and 350掳C.
   • Apply solder to the leads and pads within 3 seconds to avoid overheating.
   • Allow the solder joints to cool naturally without movement.

3. Storage:

   • Store the capacitors in a dry environment with a temperature range of -55掳C to 125掳C.
   • Avoid exposure to high humidity and direct sunlight.

4. Handling:

   • Handle the capacitors with care to avoid mechanical damage.
   • Do not apply excessive force or bend the leads.

5. Testing:

   • Before installation, test the capacitance and ESR using a multimeter or LCR meter to ensure they meet the specified values.
   • Perform visual inspection for any signs of damage or leakage.

6. Operational Considerations:

   • Ensure the operating voltage does not exceed the rated voltage (35V).
   • Monitor the ripple current to ensure it does not exceed the maximum ripple current (1000mA).
   • Regularly check the operating temperature to ensure it remains within the specified range (-55掳C to 85掳C).

By following these instructions, you can ensure the optimal performance and longevity of the GBJ35M capacitor.

(For reference only)