Details

---

BUY BTA40-800BRG-JSM https://www.utsource.net/itm/p/12603649.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Rated RMS On-State Current	IT(RMS)	-	40	-	A	TC = 40°C, see note 1
Peak On-State Current	ITSM	-	350	-	A	Tj = 25°C, see note 2
Repetitive Peak Off-State Voltage	VDRM	-	800	-	V	See note 3
Non-Repetitive Peak Off-State Voltage	VRRM	-	800	-	V	See note 4
Gate Trigger Current	IG(T)	-	60	-	mA	dIT/dt = 25A/μs
Holding Current	IH	-	5	-	mA
Turn-On Time	ton	-	1.5	-	μs	EGT = 5V, IF = 20A
Turn-Off Time	toff	-	4.5	-	μs	EGT = -5V, IF = 20A
Power Dissipation	PD	-	-	270	W	TC = 40°C

Instructions for BTA40-800BRG-JSM

1. Installation and Handling:

   • Handle the device with care to avoid damage to the leads.
   • Ensure proper heat sinking if operating near maximum current or power dissipation.

2. Electrical Connections:

   • Connect the gate terminal (G) to the control circuitry.
   • Main terminals (T1 and T2) should be connected to the load and power supply.

3. Operating Conditions:

   • Ensure that the junction temperature does not exceed the maximum allowable limit.
   • Check that the peak and RMS currents do not exceed the rated values to prevent overheating.

4. Safety Precautions:

   • Use appropriate insulation and isolation measures when working with high voltages.
   • Ensure the device is properly mounted on a heatsink to dissipate heat effectively.

5. Storage and Packaging:

   • Store in a dry environment away from corrosive materials.
   • Follow anti-static precautions to protect sensitive components.

Notes:

1. Rated RMS On-State Current is specified at a case temperature of 40°C.
2. Peak On-State Current is tested at a junction temperature of 25°C.
3. Repetitive Peak Off-State Voltage is the maximum voltage the device can withstand repeatedly.
4. Non-Repetitive Peak Off-State Voltage is the maximum voltage the device can handle for non-repetitive events.

(For reference only)