Details

---

BUY JQX-15F 012-1H6 https://www.utsource.net/itm/p/12603783.html

Parameter	Description
Part Number	JQX-15F 012-1H6
Type	Relay
Contact Form	SPDT (Single Pole Double Throw)
Rated Voltage	24V DC
Rated Current	10A (resistive load)
Coil Voltage	12V DC
Coil Power Consumption	1.2W (at 12V DC)
Insulation Resistance	>100M惟 (at 500V DC)
Dielectric Strength	1000V AC for 1 minute
Contact Resistance	<50m惟 (initial)
Mechanical Life	10 million operations (no load)
Electrical Life	100,000 operations (resistive load)
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Weight	15g
Dimensions	17.5mm x 12.5mm x 10.5mm

Instructions

1. Installation:

   • Ensure the relay is installed in a well-ventilated area to prevent overheating.
   • Mount the relay on a flat, stable surface using the provided mounting holes.

2. Wiring:

   • Connect the coil terminals to the control circuit using the specified coil voltage (12V DC).
   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the load circuit according to the application requirements.

3. Operation:

   • When the coil is energized, the normally open contact will close, and the normally closed contact will open.
   • When the coil is de-energized, the contacts will return to their default positions.

4. Maintenance:

   • Regularly inspect the relay for any signs of wear or damage.
   • Clean the relay contacts with a soft, dry cloth if necessary.

5. Safety Precautions:

   • Do not exceed the rated voltage and current specifications.
   • Ensure the relay is disconnected from the power source before performing any maintenance or inspection.
   • Use appropriate fuses or circuit breakers to protect the relay from overcurrent conditions.

(For reference only)