Details

---

BUY RJP63K2DPP https://www.utsource.net/itm/p/12603802.html

Parameter	Description	Value
Part Number	Full part number	RJP63K2DPP
Type	Component type	Resistor
Resistance	Nominal resistance value	63 k惟
Tolerance	Resistance tolerance	卤1%
Power Rating	Maximum power dissipation	0.125 W
Temperature Coefficient	Change in resistance with temperature (ppm/掳C)	100 ppm/掳C
Operating Temperature	Range of temperatures for operation	-55掳C to +125掳C
Case Size	Physical size of the resistor	0805
Termination	Type of termination	SMD
Packaging	Packaging type	Tape & Reel
Compliance	Standards and regulations compliance	RoHS

Instructions:

1. Handling:

   • Handle with care to avoid damage.
   • Use appropriate ESD (Electrostatic Discharge) protection when handling.

2. Mounting:

   • Place the resistor on the PCB (Printed Circuit Board) according to the design layout.
   • Ensure proper alignment with the designated pads.
   • Apply solder paste or flux to the pads before placing the component.
   • Use a reflow soldering process to secure the resistor to the PCB.

3. Soldering:

   • Preheat the PCB to the recommended temperature.
   • Use a soldering iron or reflow oven set to the appropriate temperature profile.
   • Ensure the solder joints are clean and free of voids.
   • Inspect the solder joints visually and with an X-ray if necessary.

4. Storage:

   • Store in a dry, cool place to prevent moisture absorption.
   • Use desiccant packets if storing for extended periods.

5. Testing:

   • Verify the resistance value using a multimeter after installation.
   • Check for any short circuits or open circuits.

6. Disposal:

   • Dispose of the component in accordance with local environmental regulations.

(For reference only)