Details

---

BUY G3M-202PL-12VDC https://www.utsource.net/itm/p/12603833.html

Parameter	Value
Model Number	G3M-202PL-12VDC
Type	Relay
Coil Voltage	12V DC
Coil Current	38 mA (max)
Coil Power	0.456 W (max)
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	5 A at 250 VAC / 30 VDC
Contact Resistance	100 m惟 (max)
Insulation Resistance	100 M惟 (min) at 250 VDC
Dielectric Strength	1,000 VAC (rms) for 1 minute
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Operating Humidity	5% to 95% RH (non-condensing)
Mechanical Life	10 million operations
Electrical Life	100,000 operations (resistive load)
Weight	3.5 g
Dimensions	17.5 mm (L) x 12.5 mm (W) x 10.0 mm (H)
Terminal Type	Solder Lug
Mounting	PCB Mount

Instructions:

1. Installation:

   • Ensure the relay is mounted on a clean, flat surface.
   • Use appropriate soldering techniques to attach the relay to the PCB.
   • Avoid excessive heat during soldering to prevent damage to the relay.

2. Coil Connection:

   • Connect the coil terminals to a 12V DC power source.
   • Ensure the polarity is correct to avoid damaging the relay.

3. Contact Connection:

   • Connect the load to the common (COM) terminal.
   • Connect the normally open (NO) and normally closed (NC) terminals as required by your application.

4. Operation:

   • When the coil is energized, the contacts will switch from the NC position to the NO position.
   • When the coil is de-energized, the contacts will return to the NC position.

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Ensure the operating environment is within the specified temperature and humidity ranges.

6. Safety:

   • Do not exceed the maximum contact ratings to avoid damage or failure.
   • Ensure proper insulation and isolation to prevent electrical hazards.

7. Disposal:

   • Dispose of the relay according to local regulations for electronic waste.

(For reference only)