Details

---

BUY ST2-DC24V-F ST2-24V-F 24V 8A 6PINS https://www.utsource.net/itm/p/12603905.html

Parameter	Description	Value
Model	Product Name	ST2-DC24V-F
Voltage	Operating Voltage	24V DC
Current	Maximum Output Current	8A
Pin Configuration	Number of Pins	6 pins
Type	Relay Module	SPDT
Coil Voltage	Relay Coil Voltage	24V DC
Contact Form	Relay Contact Form	SPDT
Insulation	Electrical Insulation Resistance	>1000M惟
Dielectric Strength	Dielectric Withstand Voltage	1500V AC (1min)
Operating Temperature	Operating Temp. Range	-40掳C to 85掳C
Storage Temperature	Storage Temp. Range	-40掳C to 125掳C
Humidity	Operating Humidity	5% to 95% RH

Instructions for Use:

1. Installation: Ensure the relay module is installed in a well-ventilated area, away from direct heat sources and moisture.
2. Power Connection: Connect the power supply to the designated terminals ensuring the voltage matches the rated coil voltage of 24V DC.
3. Load Connection: Connect your load to the NO (Normally Open) and COM (Common) terminals for controlled operation. For normally closed operations, connect to NC (Normally Closed) and COM.
4. Control Signal: Apply a control signal to the input terminals to operate the relay. The relay will switch according to the applied signal.
5. Safety Precautions: Do not exceed the maximum current rating of 8A on any contact. Always disconnect power before making connections or performing maintenance.
6. Maintenance: Regularly inspect connections and terminals for corrosion or damage. Clean with a dry cloth if necessary.

(For reference only)