Details

---

BUY 1J4B41 https://www.utsource.net/itm/p/12603906.html

Parameter	Value	Unit
Type	Reed Relay	-
Contact Form	SPST NO (Single Pole Single Throw Normally Open)	-
Coil Voltage	5	V
Coil Current	20	mA
Contact Rating	0.3A @ 28VDC	A/V
Insulation Resistance	1000	M惟
Dielectric Withstand	500	VAC
Operating Temperature	-40 to +85	掳C
Storage Temperature	-40 to +100	掳C
Mechanical Life	10,000,000	Cycles
Electrical Life	1,000,000	Cycles

Instructions:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Do not subject the relay to excessive shock or vibration.

2. Installation:

   • Ensure the relay is mounted on a flat, stable surface.
   • Use appropriate soldering techniques to avoid overheating the contacts and coil.

3. Coil Operation:

   • Apply the specified coil voltage to energize the relay.
   • Ensure the coil current does not exceed the rated value to prevent damage.

4. Contact Usage:

   • Do not exceed the contact rating to avoid premature wear or failure.
   • Ensure the load is within the specified voltage and current limits.

5. Environmental Conditions:

   • Operate the relay within the specified temperature range to ensure reliable performance.
   • Store the relay in a dry, cool environment to prevent degradation.

6. Testing:

   • Test the relay under controlled conditions to verify its operation.
   • Use a multimeter to check the continuity of the contacts and the resistance of the coil.

7. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Replace the relay if it fails to operate correctly or shows signs of physical damage.

(For reference only)