Details

---

BUY JS24-K 24V 8A 5PINS https://www.utsource.net/itm/p/12603909.html

Parameter	Specifications
Part Number	JS24-K
Voltage Rating	24V
Current Rating	8A
Pin Count	5
Package Type	Through-hole
Operating Temperature	-40掳C to +85掳C
Insulation Resistance	>100M惟 at 500VDC
Dielectric Strength	1500VAC for 1 minute
Contact Material	Silver alloy
Body Material	Flame retardant plastic

Instructions:

1. Installation:

   • Ensure the voltage and current ratings of the circuit match the specifications of the JS24-K relay.
   • Install the relay in a well-ventilated area to prevent overheating.
   • Secure the relay using the mounting holes provided.

2. Wiring:

   • Connect the control coil wires to pins 85 and 86.
   • Connect the load wires to pins 30, 87, and optionally 87a if using a double-throw configuration.
   • Verify all connections are tight and secure.

3. Operation:

   • Apply the rated voltage across pins 85 and 86 to energize the coil and switch the contacts.
   • Ensure not to exceed the maximum current rating on the switched contacts.

4. Maintenance:

   • Periodically inspect terminals for corrosion or loose connections.
   • Test the operation of the relay under load conditions to ensure reliable switching.

5. Safety:

   • Always disconnect power before performing any maintenance or installation.
   • Use appropriate personal protective equipment when handling electrical components.

(For reference only)