Details

---

BUY TCA785P https://www.utsource.net/itm/p/12603940.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	4.5	-	20	V	Operating supply voltage range
Control Voltage	Vc	0.6	-	1.5	V	Control input voltage range for triggering
Output Current	Iout	-	50	100	mA	Maximum output current
Output Voltage Drop	Vce(sat)	-	1.2	1.8	V	Collector-emitter saturation voltage
Triggering Time	ttr	-	1.5	3	渭s	Time required to trigger the output
Storage Temperature	Tstg	-40	-	125	掳C	Temperature range for storage
Operating Temperature	Topr	-25	-	85	掳C	Temperature range for operation
Power Dissipation	Ptot	-	625	-	mW	Total power dissipation at 25掳C ambient temperature
Input Capacitance	Cin	-	10	15	pF	Capacitance at control input
Output Capacitance	Cout	-	5	10	pF	Capacitance at output

Instructions for Using TCA785P:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 4.5V to 20V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Control Voltage (Vc):

   • Apply a control voltage between 0.6V and 1.5V to trigger the output.
   • Ensure the control signal is clean and free from noise to prevent false triggering.

3. Output Current (Iout):

   • The maximum output current is 100mA, but it is typically around 50mA.
   • Do not exceed the maximum output current to avoid damaging the device.

4. Output Voltage Drop (Vce(sat)):

   • The collector-emitter saturation voltage is typically 1.2V but can range up to 1.8V.
   • Consider this voltage drop when designing your circuit to ensure proper load operation.

5. Triggering Time (ttr):

   • The device requires a triggering time of 1.5渭s to 3渭s.
   • Ensure the control signal duration is sufficient to reliably trigger the output.

6. Temperature Ranges:

   • Store the device between -40掳C and 125掳C.
   • Operate the device within the temperature range of -25掳C to 85掳C to ensure reliable performance.

7. Power Dissipation (Ptot):

   • The total power dissipation should not exceed 625mW at 25掳C ambient temperature.
   • Use appropriate heat sinking if operating near the maximum power dissipation.

8. Input and Output Capacitance:

   • The input capacitance is typically 10pF and can range up to 15pF.
   • The output capacitance is typically 5pF and can range up to 10pF.
   • Consider these values when designing the input and output circuits to avoid loading issues.

By following these parameters and instructions, you can ensure the TCA785P operates reliably and efficiently in your application.

(For reference only)