Details

---

BUY (100PCS)0603 Chip Resistor 1% 1/10W 13K(100pcs) https://www.utsource.net/itm/p/12603964.html

Parameter	Value
Package Quantity	100 pcs
Size	0603
Tolerance	卤1%
Power Rating	1/10W (0.1W)
Resistance	13K惟

Instructions:

1. Handling:

   • Handle with care to avoid physical damage.
   • Use appropriate tools for soldering to prevent overheating.

2. Soldering:

   • Preheat the PCB to around 100掳C before soldering.
   • Use a soldering iron with a temperature setting between 300掳C to 350掳C.
   • Apply a small amount of solder to the pads on the PCB.
   • Place the resistor on the pads and reflow the solder to secure it in place.
   • Ensure the solder joints are smooth and free of voids or excess solder.

3. Storage:

   • Store in a dry, cool place to prevent moisture damage.
   • Keep away from direct sunlight and high humidity environments.

4. Usage:

   • Verify the resistance value using a multimeter before installation.
   • Ensure the power rating is suitable for your application to avoid overheating and potential failure.
   • Use these resistors in circuits where precision and stability are required, such as in signal conditioning, voltage dividers, and current limiting.

5. Disposal:

   • Dispose of any defective or unused components according to local regulations for electronic waste.

(For reference only)