Details

---

BUY 0603 Chip KesistoK 5% 1/10W 2.2K(100pcs) https://www.utsource.net/itm/p/12603966.html

Parameter	Value
Component Type	Chip Resistor
Size	0603
Tolerance	5%
Power Rating	1/10W (0.1W)
Resistance	2.2K Ohms
Quantity	100 pcs

Instructions:

1. Handling:

   • Use appropriate ESD (Electrostatic Discharge) protection when handling the components to avoid damage.
   • Store in a dry and cool place to prevent moisture damage.

2. Soldering:

   • Preheat the PCB to around 120掳C before soldering.
   • Use a temperature-controlled soldering iron set to 300-350掳C.
   • Apply a small amount of solder paste or flux to the pads.
   • Place the resistor on the PCB and reflow solder using a reflow oven or hot air gun.
   • Ensure the solder joints are smooth and free of voids.

3. Mounting:

   • Ensure the resistor is placed correctly on the PCB with the correct orientation (if applicable).
   • Verify that the resistor does not touch other components or conductive parts to avoid short circuits.

4. Testing:

   • After soldering, use a multimeter to check the resistance value and ensure it matches the specified 2.2K Ohms 卤5%.
   • Check for any shorts or open circuits.

5. Storage:

   • Store unused resistors in their original packaging or in a sealed container with desiccant to prevent moisture absorption.
   • Label the container with the component type, resistance value, and tolerance for easy identification.

(For reference only)