Details

---

BUY OMIF-S-112LM https://www.utsource.net/itm/p/12603995.html

Parameter	Value/Description
Product Name	OMIF-S-112LM
Type	Surface Mount Inductor
Manufacturer	TDK Corporation
Inductance (L)	1.0 渭H to 100 渭H
Tolerance	卤10%
Rated Current (Irms)	1.5 A to 4.5 A
Saturation Current	2.0 A to 6.0 A
DC Resistance (Rdc)	0.01 惟 to 0.1 惟
Self-Resonant Frequency (SRF)	50 MHz to 150 MHz
Operating Temperature	-40掳C to +125掳C
Case Size	1.0 mm x 1.25 mm x 0.5 mm
Termination	Solderable Ni barrier SnPb plating
RoHS Compliance	Yes
Halogen-Free	Yes

Instructions for Use:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Store in a dry, cool place away from direct sunlight.

2. Mounting:

   • Use standard surface mount technology (SMT) equipment for placement.
   • Ensure the board is clean and free of contaminants before soldering.
   • Preheat the board to reduce thermal shock during soldering.

3. Soldering:

   • Use a soldering temperature of 230掳C to 260掳C.
   • Soldering time should not exceed 10 seconds.
   • Avoid excessive pressure on the component during soldering.

4. Inspection:

   • Visually inspect the solder joints for proper wetting and absence of voids.
   • Use X-ray inspection if necessary to ensure good solder joint quality.

5. Testing:

   • Measure the inductance and DC resistance using appropriate test equipment.
   • Verify that the inductance falls within the specified tolerance range.
   • Test the rated current and saturation current to ensure the component meets the required specifications.

6. Storage:

   • Store unused components in their original packaging.
   • Keep in a dry environment to prevent moisture absorption.

7. Disposal:

   • Dispose of the component according to local regulations for electronic waste.
   • Ensure that the disposal method is environmentally friendly.

(For reference only)