Details

---

BUY SKIIP24NAB12T4V1 https://www.utsource.net/itm/p/12603999.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Blocking Voltage	VBR(DSS)	-	-	1200	V	Maximum repetitive peak off-state voltage
Continuous Drain Current	ID(ON)	-	2400	-	A	@ TC = 25掳C, VGS = 15V
Continuous Drain Current	ID(ON)	-	1800	-	A	@ TC = 100掳C, VGS = 15V
Power Dissipation	PTOT	-	-	2300	W	@ TC = 25掳C
Junction Temperature	TJ	-100	-	175	掳C	Maximum operating temperature
Storage Temperature	TSTG	-55	-	150	掳C	Temperature range for storage
Gate Threshold Voltage	VGS(th)	2	4	6	V	@ ID = 10A, TA = 25掳C
On-State Resistance	RDS(on)	-	2.5	-	m惟	@ ID = 1800A, VGS = 15V, TC = 100掳C
Total Gate Charge	QG	-	140	-	nC	@ ID = 1800A, VGS = 15V
Input Capacitance	Ciss	-	1300	-	pF	@ VDS = 600V, f = 1MHz
Output Capacitance	Coss	-	180	-	pF	@ VDS = 600V, f = 1MHz
Reverse Transfer Capacitance	Crss	-	200	-	pF	@ VDS = 600V, f = 1MHz

Instructions:

1. Mounting and Handling:

   • Ensure proper heat sinking to manage thermal dissipation.
   • Handle with care to avoid static damage.

2. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table.
   • Operate within the specified junction temperature range to ensure reliability.

3. Gate Drive:

   • Use a gate resistor to control the switching speed and reduce EMI.
   • Ensure the gate voltage is within the recommended range to avoid damage.

4. Thermal Management:

   • Use a heatsink or cooling system to maintain the device temperature below the maximum junction temperature.
   • Monitor the temperature during operation to prevent overheating.

5. Storage:

   • Store in a dry, cool place within the specified storage temperature range.
   • Avoid exposure to high humidity and corrosive environments.

6. Testing:

   • Perform initial testing at low power levels to verify correct operation.
   • Use appropriate test equipment and follow safety guidelines.

(For reference only)