Details

---

BUY 5D-25 https://www.utsource.net/itm/p/12604001.html

Parameter	Description
Type	5D-25 Relay
Coil Voltage	5V DC
Coil Current	100mA (max)
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	10A at 250V AC / 10A at 30V DC
Insulation Resistance	100M惟 (min) at 500V DC
Dielectric Strength	1000V AC for 1 minute
Mechanical Life	10 million operations (min)
Electrical Life	100,000 operations (min) at rated load
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Weight	15g (approx.)

Instructions:

1. Installation:

   • Ensure the relay is installed in a location with adequate ventilation and away from sources of excessive heat or moisture.
   • Mount the relay on a flat, stable surface using the provided mounting holes.

2. Wiring:

   • Connect the coil terminals to the appropriate power supply (5V DC).
   • Connect the common (COM) terminal to the circuit you wish to control.
   • Connect the normally open (NO) and normally closed (NC) terminals to the respective parts of the circuit as required.

3. Operation:

   • When the coil is energized, the contact will switch from the normally closed (NC) position to the normally open (NO) position.
   • When the coil is de-energized, the contact will return to the normally closed (NC) position.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay contacts with a soft, dry cloth if necessary.

5. Safety:

   • Do not exceed the rated voltage and current specifications.
   • Ensure proper grounding and isolation to prevent electrical hazards.
   • Use appropriate fuses or circuit breakers to protect the relay and connected circuits.

(For reference only)