Details

---

BUY TL-W3MC1 NEW AND ORIGINAL OMRON PROXIMITY SENSOR,PROXIMITY SWITCH, 12-24VDC 2M https://www.utsource.net/itm/p/12604005.html

Parameter	Specification
Model	TL-W3MC1
Brand	Omron
Type	Proximity Sensor, Proximity Switch
Supply Voltage	12-24 VDC
Operating Distance	2 m (Maximum)
Output Type	NPN NO (Normally Open)
Response Time	Typically 1 ms
Repeatability	卤0.1 mm
Housing Material	PBT (Polybutylene Terephthalate)
Operating Temperature	-25掳C to +70掳C
Storage Temperature	-40掳C to +80掳C
Protection Class	IP67
Weight	Approx. 20 g

Instructions for Use:

1. Installation:

   • Ensure the sensor is installed in a location where it will not be subjected to excessive mechanical stress or vibration.
   • The sensing face should be clean and free from any obstructions.

2. Wiring:

   • Connect the brown wire to the positive terminal of the power supply (12-24 VDC).
   • Connect the blue wire to the negative terminal of the power supply.
   • Connect the black wire to the input terminal of the control system.

3. Power Supply:

   • Use a regulated DC power supply within the specified voltage range to avoid damage to the sensor.

4. Adjustment:

   • No adjustment is typically required as the sensor is factory-set. However, ensure the target object is within the operational distance range for reliable detection.

5. Maintenance:

   • Periodically inspect the sensor for dirt or debris that may affect performance.
   • Clean the sensor with a soft cloth; avoid using abrasive materials.

6. Safety Precautions:

   • Do not exceed the maximum operating voltage to prevent damage.
   • Ensure proper grounding of the system to avoid electrical hazards.

(For reference only)