Details

---

BUY KBPC610 https://www.utsource.net/itm/p/12604008.html

Parameter	Description	Value
Type	Rectifier Bridge	KBPC610
Package	Case Type	TO-220
Forward Voltage	Maximum Forward Voltage Drop (VF)	1.0 V (at 6 A)
Reverse Voltage	Maximum Reverse Voltage (VRRM)	1000 V
Average Rectified Output Current	Io(AV)	6 A
Peak Repetitive Reverse Voltage	VRRM	1000 V
Peak Non-Repetitive Forward Surge Current	IFSM	300 A (8.3 ms single half sine-wave)
Operating Temperature Range	TA	-55掳C to +150掳C
Storage Temperature Range	TSTG	-65掳C to +150掳C
Thermal Resistance, Junction to Case	R胃JC	2.5掳C/W
Thermal Resistance, Junction to Ambient	R胃JA	40掳C/W

Instructions for Use:

1. Mounting: Ensure proper mounting to a heatsink if operating at high currents to maintain junction temperature within safe limits.
2. Polarity: Observe correct polarity when connecting the bridge rectifier. The input terminals are marked as ~ (AC input), and the output terminals are marked as + (positive) and - (negative).
3. Surge Current Handling: The device can handle peak surge currents up to 300 A for short durations (8.3 ms single half sine-wave). Ensure that the circuit design does not exceed this limit.
4. Temperature Management: Operate the device within the specified temperature range to avoid thermal damage. Use adequate cooling methods if necessary.
5. Electrical Isolation: Ensure that the device is electrically isolated from the chassis or ground to prevent short circuits.
6. Capacitor Selection: When using with capacitors, choose capacitors with appropriate ratings to handle the ripple current and voltage.
7. Safety Precautions: Handle the device with care to avoid mechanical damage. Follow standard safety practices when working with high voltages.

(For reference only)