Details

---

BUY LM211N https://www.utsource.net/itm/p/12604016.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.0	-	36	V
Supply Current	IS	Quiescent, VOUT = 0V	-	500	-	渭A
Input Offset Voltage	VIO	Typical	-	2	-	mV
Input Bias Current	IB	Typical	-	80	-	nA
Input Offset Current	IIO	Typical	-	20	-	nA
Differential Input Voltage	VID	Maximum	-	-	36	V
Output Voltage Swing	VOS	High Level, IL = 0mA	-	-	VCC - 1.5	V
Output Voltage Swing	VOS	Low Level, IL = 0mA	0	-	0.02	V
Common-Mode Input Range	VCM	Typical	0	-	VCC - 1.5	V
Slew Rate	SR	Typical	-	0.5	-	V/渭s
Bandwidth	BW	Unity Gain	-	1	-	MHz
Rise Time	tr	0 to VCC/2	-	1.4	-	渭s
Fall Time	tf	VCC/2 to 0	-	1.4	-	渭s

Instructions for Using the LM211N

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.0V to 36V.
   • The quiescent supply current is typically 500 渭A.

2. Input Configuration:

   • The input offset voltage (V_IO) is typically 2 mV.
   • The input bias current (I_B) is typically 80 nA.
   • The input offset current (I_IO) is typically 20 nA.
   • The differential input voltage (V_ID) should not exceed 36V.
   • The common-mode input range (V_CM) is from 0V to V_CC - 1.5V.

3. Output Configuration:

   • The output voltage swing (V_OS) can go as high as V_CC - 1.5V and as low as 0.02V.
   • The slew rate (SR) is typically 0.5 V/渭s.

4. Performance Considerations:

   • The bandwidth (BW) is 1 MHz at unity gain.
   • The rise time (t_r) and fall time (t_f) are both typically 1.4 渭s.

5. Handling and Storage:

   • Store the device in a dry, cool place to avoid moisture damage.
   • Handle the device with care to prevent electrostatic discharge (ESD) damage.

6. Circuit Design:

   • Use appropriate decoupling capacitors near the power supply pins to ensure stable operation.
   • Ensure all connections are secure and free from shorts or open circuits.

7. Testing:

   • Before finalizing the design, test the circuit under various operating conditions to ensure it meets the required specifications.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)