Details

---

BUY 2010 Chip Resistor 1.8M惟 卤1% 3/4W https://www.utsource.net/itm/p/12604020.html

Parameter	Value
Resistance	1.8M惟
Tolerance	卤1%
Power Rating	3/4W (0.75W)
Operating Voltage	200V
Temperature Range	-55掳C to +125掳C
Operating Frequency	1MHz
Size	2010 (20mm x 10mm)
Case Type	Chip
Material	Metal Oxide Film
Mounting Type	Surface Mount

Instructions:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use appropriate ESD protection to prevent static damage.

2. Mounting:

   • Ensure the PCB is clean and free from contaminants.
   • Apply solder paste or flux to the pads.
   • Place the resistor on the PCB ensuring proper alignment.
   • Solder the resistor using a reflow soldering process or a soldering iron with a temperature setting suitable for surface mount components (typically 260掳C to 300掳C).

3. Soldering:

   • Use a controlled soldering profile to avoid thermal shock.
   • Allow the solder joints to cool naturally without disturbance.

4. Inspection:

   • Visually inspect the solder joints for proper wetting and absence of bridges or voids.
   • Use a multimeter to verify the resistance value and ensure it falls within the specified tolerance.

5. Storage:

   • Store in a dry, cool place to prevent moisture absorption.
   • Keep away from direct sunlight and corrosive environments.

6. Disposal:

   • Dispose of the component according to local regulations for electronic waste.

(For reference only)