Details

---

BUY G2RL-1-E-12VDC REPLACE G2RL-1-E-DC12V 12V 16A 8PINS https://www.utsource.net/itm/p/12604039.html

Parameter	Value
Part Number	G2RL-1-E-12VDC
Replaces	G2RL-1-E-DC12V
Voltage Rating	12V DC
Current Rating	16A
Pin Configuration	8 Pins
Type	Relay
Coil Voltage	12V DC
Contact Form	SPDT (Single Pole, Double Throw)
Operating Temperature	-40掳C to +85掳C
Insulation Resistance	>100M惟 at 500V DC
Dielectric Strength	AC 1000V for 1 minute

Instructions:

1. Installation:

   • Ensure the relay is installed in a location that adheres to the operating temperature range.
   • Verify that the power supply matches the coil voltage rating of 12V DC.

2. Wiring:

   • Connect the coil terminals to the appropriate control circuit using the correct polarity.
   • Wire the common (COM), normally open (NO), and normally closed (NC) contacts according to your application requirements.

3. Testing:

   • Before full operation, test the relay with a multimeter to ensure proper switching action.
   • Confirm that the relay operates correctly under load conditions within its rated current.

4. Maintenance:

   • Periodically inspect connections for corrosion or looseness.
   • Ensure environmental conditions do not exceed the specified limits to prevent premature failure.

5. Disposal:

   • Follow local regulations for electronic component disposal.

(For reference only)