Details

---

BUY (5PCS) DIP CERAMIC RESISTOR 5% 5W 100惟(100R) https://www.utsource.net/itm/p/12604058.html

Parameter	Value
Package Quantity	5PCS
Type	DIP Ceramic Resistor
Tolerance	5%
Power Rating	5W
Resistance	100惟 (100R)

Instructions:

1. Handling: Handle with care to avoid damage. Ensure that the leads are not bent excessively close to the body of the resistor.
2. Installation: Insert the resistor into the circuit board ensuring correct orientation if specified. Typically, resistors do not have polarity.
3. Soldering: Use a soldering iron at an appropriate temperature (usually around 350掳C for through-hole components). Ensure that the solder joints are smooth and free of excess solder.
4. Cooling: Allow the soldered joint to cool naturally. Do not move the component until the solder has fully solidified.
5. Inspection: Check the solder connections for any shorts or cold joints. Verify that the resistor is securely attached.
6. Testing: Once assembled, test the circuit to ensure the resistor is functioning within its specified parameters.

(For reference only)