Details

---

BUY G6B-1114P-FD-US 24VDC 24V 5A 4PINS https://www.utsource.net/itm/p/12604084.html

Parameter	Value
Part Number	G6B-1114P-FD-US
Voltage Rating	24VDC
Current Rating	5A
Pin Count	4 pins
Type	Relay
Coil Voltage	24V
Contact Form	SPDT (Single Pole Double Throw)
Operating Temperature	-40掳C to +85掳C
Insulation Resistance	100M惟 min. at 500VDC
Dielectric Strength	1000VAC for 1 minute
Mechanical Life	10 million operations
Electrical Life	100,000 operations (resistive load)

Instructions:

1. Installation:

   • Ensure the relay is installed in a location that meets the operating temperature requirements.
   • Secure the relay using the provided mounting hardware.

2. Wiring:

   • Connect the coil terminals to the control circuit providing the specified coil voltage (24VDC).
   • Connect the load to the normally open (NO) and common (COM) contacts if you want the load to be energized when the relay is activated.
   • For normally closed (NC) operation, connect the load between NC and COM contacts.

3. Operation:

   • When the coil is energized with the rated voltage, the relay will switch the contacts from their normal state to the actuated state.
   • Ensure not to exceed the current rating of 5A on the contacts to avoid damage.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Keep the relay clean and free from debris that might interfere with its operation.

5. Safety:

   • Always disconnect power before performing any maintenance or installation.
   • Follow all relevant electrical safety guidelines and regulations.

(For reference only)