Details

---

BUY 5046X005 https://www.utsource.net/itm/p/12604100.html

Parameter	Value	Unit
Part Number	5046X005	-
Type	Ceramic Capacitor	-
Capacitance	5.0	pF
Voltage Rating	500	VDC
Tolerance	卤5%	-
Temperature Coefficient	NPO (C0G)	ppm/掳C
Operating Temperature	-55 to +125	掳C
Case Size	0603	-
Termination	Solder	-
Packaging	Tape & Reel	-

Instructions:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use ESD-safe equipment and practices to prevent electrostatic discharge.

2. Soldering:

   • Preheat components to 125掳C for 5 minutes before soldering.
   • Soldering temperature should not exceed 260掳C.
   • Soldering time should not exceed 10 seconds per joint.

3. Mounting:

   • Ensure the PCB is clean and free of contaminants.
   • Place the capacitor on the PCB with the correct polarity (if applicable).
   • Apply a small amount of solder paste to the pads before placement.

4. Inspection:

   • Visually inspect the solder joints for proper wetting and alignment.
   • Use X-ray inspection if necessary to ensure internal connections.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Use within 12 months of receipt for optimal performance.

6. Testing:

   • Test the assembled PCB for functionality and capacitance using a multimeter or LCR meter.
   • Ensure the voltage rating is not exceeded during testing.

7. Disposal:

   • Dispose of any defective or unused components in accordance with local environmental regulations.

(For reference only)