Details

---

BUY BTS621L1 E3128A https://www.utsource.net/itm/p/12604102.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VIN	4.5	-	40	V	Input supply voltage range
Continuous Current	IC	-	40	60	A	Continuous output current (depending on heat sink)
Peak Current	IPK	-	120	-	A	Peak output current (10 渭s pulse, TA = 25掳C)
On-State Resistance	RDS(on)	-	4.5	7.0	m惟	On-state resistance at TA = 25掳C
Thermal Resistance	Rth(j-c)	-	0.5	-	K/W	Junction-to-case thermal resistance
Maximum Junction Temperature	TJ(max)	-	-	150	掳C	Maximum junction temperature
Protection Features	-	-	-	-	-	Overcurrent, short-circuit, overtemperature, and undervoltage lockout (UVLO)
Operating Temperature	TA	-40	-	125	掳C	Ambient operating temperature range
Storage Temperature	TSTG	-40	-	150	掳C	Storage temperature range

Instructions for Use:

1. Power Supply:

   • Ensure the input voltage is within the specified range of 4.5V to 40V.
   • Use appropriate decoupling capacitors near the power input to stabilize the supply.

2. Current Handling:

   • The BTS621L1 E3128A can handle up to 40A continuously with proper heat sinking.
   • For peak currents up to 120A, ensure the pulses are short (10 渭s) and the ambient temperature is controlled.

3. Thermal Management:

   • Mount the device on a suitable heat sink to maintain the junction temperature below 150掳C.
   • Monitor the thermal resistance to ensure efficient heat dissipation.

4. Protection:

   • The device includes built-in protection features such as overcurrent, short-circuit, overtemperature, and undervoltage lockout (UVLO).
   • Do not rely solely on these protections; design your circuit to avoid conditions that could trigger them.

5. Operating Temperature:

   • Operate the device within the ambient temperature range of -40掳C to 125掳C.
   • Store the device in a temperature range of -40掳C to 150掳C.

6. Layout Considerations:

   • Use wide, low-inductance traces for high-current paths to minimize voltage drops and inductive effects.
   • Keep control signals away from high-current paths to reduce noise interference.

7. Safety:

   • Follow all safety guidelines and regulations when handling and designing circuits with this device.
   • Ensure proper insulation and isolation to prevent electrical shock and damage.

By adhering to these parameters and instructions, you can ensure reliable and efficient operation of the BTS621L1 E3128A.

(For reference only)