Details

---

BUY 2010 CHIP RESISTOR 5% 1/2W 15R https://www.utsource.net/itm/p/12604151.html

Parameter	Value
Component Type	Chip Resistor
Resistance	15惟
Tolerance	卤5%
Power Rating	1/2W (0.5W)
Size	2010
Operating Voltage	50V
Temperature Range	-55掳C to +125掳C
Operating Frequency	1MHz

Instructions for Use:

1. Mounting:

   • Ensure the resistor is placed on the PCB with the correct orientation, although resistors are non-polarized.
   • Use a reflow soldering process or hand soldering with a temperature-controlled soldering iron.

2. Soldering:

   • Preheat the PCB to around 100掳C to 120掳C.
   • Apply a small amount of solder paste to the pads.
   • Place the resistor on the pads and reflow the solder using a reflow oven or a hot air gun.
   • For hand soldering, apply the solder to the joint between the pad and the resistor lead, ensuring a good connection without excess solder.

3. Inspection:

   • Visually inspect the solder joints for proper wetting and no bridging between pads.
   • Use a multimeter to verify the resistance value and ensure it is within the specified tolerance.

4. Storage:

   • Store in a dry, cool place to prevent moisture damage.
   • Keep away from direct sunlight and high temperatures.

5. Handling:

   • Handle with care to avoid physical damage.
   • Use ESD-safe equipment and practices to prevent static discharge damage.

6. Disposal:

   • Dispose of the resistor according to local regulations for electronic waste.

(For reference only)