Details

---

BUY AQH3223AX https://www.utsource.net/itm/p/12604165.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VDD	1.7	-	5.5	V
Operating Current	IDD	-	10	-	渭A	Typical at VDD = 3.3V, TA = 25掳C
Output High Voltage	VOH	2.4	-	VDD	V	IL = -1mA, VDD = 3.3V
Output Low Voltage	VOL	0	-	0.4	V	IL = 1mA, VDD = 3.3V
Input High Voltage	VIH	2	-	VDD	V
Input Low Voltage	VIL	0	-	0.8	V
Propagation Delay Time	tpd	-	6	-	ns	VDD = 3.3V, TA = 25掳C
Power-down Leakage Current	ISD	-	1	-	渭A	VDD = 0V, TA = 25掳C
Operating Temperature	TA	-40	-	85	掳C
Storage Temperature	TSTG	-65	-	150	掳C

Instructions for Use:

1. Supply Voltage (VDD):

   • Ensure the supply voltage is within the range of 1.7V to 5.5V.
   • Avoid exceeding the maximum voltage to prevent damage to the device.

2. Operating Current (IDD):

   • The typical operating current is 10渭A at 3.3V and 25掳C.
   • Monitor the current to ensure it does not exceed the typical value under normal operating conditions.

3. Output Voltage Levels:

   • Output High (VOH): Should be at least 2.4V when the output is high, with a load current of -1mA.
   • Output Low (VOL): Should be no more than 0.4V when the output is low, with a load current of 1mA.

4. Input Voltage Levels:

   • Input High (VIH): Recognized as high when the input voltage is at least 2V or up to VDD.
   • Input Low (VIL): Recognized as low when the input voltage is no more than 0.8V.

5. Propagation Delay Time (tpd):

   • The propagation delay time is typically 6ns at 3.3V and 25掳C.
   • This is the time it takes for the output to respond to a change in the input signal.

6. Power-down Leakage Current (ISD):

   • When the device is powered down (VDD = 0V), the leakage current should be no more than 1渭A.

7. Temperature Ranges:

   • Operating Temperature (TA): The device can operate within the temperature range of -40掳C to 85掳C.
   • Storage Temperature (TSTG): The device can be stored within the temperature range of -65掳C to 150掳C.

8. Handling and Storage:

   • Store the device in a dry, cool place to avoid moisture damage.
   • Handle the device with care to avoid static discharge, which can damage the sensitive components.

9. Mounting and Soldering:

   • Follow recommended soldering profiles to ensure proper bonding without damaging the device.
   • Use appropriate flux and cleaning agents to maintain the integrity of the connections.

(For reference only)