Details

---

BUY KSD301 B140 140掳C NORMALLY CLOSE JUMP TYPE TEMPERATURE CONTROL SWITCH THERMOSTATS (5PCS) https://www.utsource.net/itm/p/12604166.html

Parameter	Description
Model	KSD301 B140
Type	Temperature Control Switch Thermostat
Switch Type	Normally Closed (NC)
Actuation Temperature	140掳C (284掳F)
Reset Temperature	Manual Reset
Contact Form	SPST-NC (Single Pole Single Throw - Normally Closed)
Rated Voltage	250V AC
Rated Current	10A (resistive load)
Power Rating	2500W (resistive load)
Dielectric Strength	2500V AC for 1 minute
Insulation Resistance	>100M惟 at 500V DC
Operating Humidity	90% RH max (non-condensing)
Operating Temperature Range	-40掳C to 140掳C (-40掳F to 284掳F)
Terminal Type	Quick Connect Terminals
Housing Material	High-Temperature Resistant Plastic
Dimensions	14mm x 14mm x 27mm (L x W x H)
Weight	Approx. 6g
Compliance	RoHS, UL, CE
Quantity	5 pieces per pack

Instructions:

1. Installation:

   • Ensure the device is powered off before installation.
   • Connect the quick connect terminals to the appropriate wires in your circuit.
   • Secure the thermostat in place, ensuring it is in direct contact with the temperature-sensing area.

2. Operation:

   • The switch will automatically close when the temperature drops below 140掳C.
   • For manual reset, press the reset button once the temperature has cooled down to a safe level.

3. Maintenance:

   • Regularly inspect the thermostat for signs of damage or wear.
   • Clean the thermostat with a dry cloth to remove dust and debris.

4. Storage:

   • Store in a dry, cool place away from direct sunlight and extreme temperatures.

5. Safety:

   • Do not exceed the rated voltage and current.
   • Do not use in environments with explosive gases or liquids.
   • Replace the thermostat if it shows any signs of malfunction or damage.

(For reference only)